Dishwasher maintenance tips

Routine Maintenance Checks Can Save You Money

Follow these dishwasher maintenance tips to extend the life of your dishwasher. Dishwashers draw water from an outside source and then use fans, jets, and nozzles to remove debris from dishes and utensils. These appliances go through several cycles depending upon the model and design of the manufacturer. When shopping for a dishwasher you should consider price, energy efficiency, features, noise level, and power. To keep your dishwasher running in like-new condition, you just need to give it a little TLC.

Cut Down on Excessive Wear and Tear

Excessive wear and tear increases the likelihood that your dishwasher will break down. Even sophisticated models will be stressed when people leave too much food or grime on their dishes. Most manufacturers suggest scraping leftovers off and doing a quick pre-wash before you place the dishes on the racks. This will prevent them from clogging the filters throughout the appliance.

The overall temperature of the water is also important. When the water isn’t hot enough the dishwasher will fail to protect you and your family from food borne illnesses, mold, and other forms of bacteria. Some models heat the water internally, but most require an outside source like a water heater. Even when water is heated within the appliance itself, the temperature may not get high enough to kill bacteria. Your owner’s manual will help you to set it to the ideal temperature.

Yearly Maintenance

Create a yearly checklist for your dishwasher and all other kitchen appliances. At first, this may seem like an unnecessary waste time and energy, but it will help you routinely check some of the key components of the dishwasher. These few minutes could end up saving you hundreds or thousands of dollars in repair and replacement costs. Be sure to inspect:

  • All moving parts inside of the machine
  • The door linings
  • Any water filters
  • Gaskets around external parts
  • The control panel
  • All hoses

Keep an eye out for any indicators that damage or deterioration has occurred. The extreme change in temperatures, constant moisture, and moving parts mean that rust, mold, and mildew can easily develop. This could compromise the functionality of the dishwasher and the safety of those using the dishes.

By keeping an eye on the vital components of your dishwasher, you will enjoy clean and sparkling dishes for thousands of loads. When repairs are required, be sure to call a dishwasher specialist who will restore it to top condition.

Signs that it’s time to replace your dishwasher

Dishwashers are expensive, and many homeowners will delay replacing theirs as long as possible. However, dishwashers are only meant to last about a decade. While it’s okay to put up with small problems such as a detergent cup that does not open easily, there are a few signs that your dishwasher needs to be replaced altogether.

Your dishes aren’t coming out hot

Your dishwasher has an element inside it that heats water to a temperature that will thoroughly kill germs. If your dishes are not hot immediately after a wash cycle, you might be brewing a germ cocktail in your dishwasher.

It doesn’t drain completely

If there is still a pool of water at the bottom of your dishwasher after a cycle, you have a problem with your drain. This might be a simple plumbing problem like a clog in the line, or a more complicated problem like a cracked drain. Broken drains can lead to leakage and floor damage.

The door does not latch properly

This can indicate the need for a simple repair, like a latch replacement. It can also mean that the entire unit has warped and no longer fits well together. A warped unit cannot hold water inside it and will need to be replaced to prevent floor damage.

There is rust

You should never see rust inside or outside your dishwasher. This indicates that water is leaking and reaching places where it should not be. If you are concerned that your dishwasher is rusting on the bottom, you can check quickly by sweeping underneath and looking in the dust for flakes of rust.

There are cracks

There should never be cracks on either the inside or the outside of a dishwasher. Dishwashers are designed to keep water inside; a crack obviously compromises this. Spare yourself an expensive flooring repair by replacing your dishwasher as soon as the cracks begin to show.

Like many other malfunctioning home appliances, a broken dishwasher can do damage far beyond the cost of repair or replacement of the appliance. Water-damaged floors and other types of damage can be both inconvenient and expensive. Save yourself money by replacing your dishwasher if one or more of these five signs appear.

Pin It on Pinterest

Share This